Rotary Vacuum Evaporator Cold Trap Condenser Model No. SSI/69

Get a Price/Quote

Rotary Vacuum Evaporator Cold Trap Condenser Model No. SSI/69 Specification

Voltage
230V

Automation Grade
Manual

Measurement Range
Standard (designed for solvent vapor capture in typical rotary evaporator processes)

Model No
SSI/69

Power Source
230V AC, Single Phase, 50 Hz

Capacity
1 to 2 Liters

Core Components
Borosilicate Glass Condenser, Cooling Chamber

Frequency
50 Hz

Temperature Range
-40C to 20C

Accuracy
100 %

Feature
Highly Efficient

Equipment Materials
Borosilicate Glass & Stainless Steel

Type
Cold Trap Condenser for Rotary Vacuum Evaporator

Usage
Laboratory

Dimension (L*W*H)
Approx. 350 x 180 x 420 mm

Weight
Approx. 8 - 12 kg

About Rotary Vacuum Evaporator Cold Trap Condenser Model No. SSI/69

Rotary Vacuum Evaporator Cold Trap Condenser Model No. SSI/69

This model of evaporator is supplied complete with geared drive non sparking noiseless motor offering smooth, speed control by analog knob upto 200RPM, jack arrangement is fitted on tapered front base for positioning glass assembly. Double walled water bath thermostatic temperature controller glass condenser double walled with one opening for vacuum and top reservoir for cooling medium, pear (Kjeldhal) shaped evaporating falsk capacity 800ml, receiver flask capacity one litre fitted with a ball joint, feeding tube, vapour path tube provided with a pressure tube, seal, clips and spring a complete working unit.

Replacement part for (Cold Trap Condenser) SSI/69

SSI/69/01	Cold Trap Condenser double walled with S-35 ball at bottom for connecting to receiving flask, with one opening for vacuum & top reservoir for cooling medium cock for feeding on one side while the other side sill be connected to motor with ring.
SSI/69/02	Vapour path tube B-24, B-29
SSI/69/03	Gasket seal for vapour tube (VITON)
SSI/69/04	Gasket seal for special chemicals
SSI/69/05	Feed tube for condenser without PTFE pipe
SSI/69/06	Receiving flask with S-35 cup (socket) joint capacity 1000ml
SSI/69/07	Evaporating flask kjeldhal cap. 800ml B-24
SSI/69/08	Evaporating flask kjeldhal cap. 500ml B-24
SSI/69/09	Evaporating flask kjeldhal cap. 300ml B-24
SSI/69/10	Evaporating flask kjeldhal cap. 100ml B-24
SSI/69/11	Tension spring to hold condenser
SSI/69/12	Wire clip
SSI/69/13	Ball joint clip with screw lock
SSI/69/14	Water bath double walled SS with digital temperature controller
SSI/69/15	Spare heater for water bath (ISI Mark)
SSI/69/16	Suitable oil free vacuum pump for rotary evaporator with vacuum gauge & regulator
SSI/69/17	Glass safety trap

Constructed for Durability and Efficiency

With its borosilicate glass condenser and polished stainless steel housing, this cold trap is engineered for high chemical resistance and dependable performance. The coil-in-tube (immersion) condenser enables efficient cooling with dry ice or refrigerants, catering to capacity ranges between 1 and 2 liters. Every joint and surface is designed to be leak-proof, delivering reliability for sensitive laboratory processes.

Wide Compatibility and Easy Installation

The SSI/69 condenser model accommodates standard rotary evaporators, making it a universal addition to laboratory setups. Its horizontal, tabletop mounting arrangement fits seamlessly into existing workspaces, and its inlet and outlet ports (10 mm) ensure easy connectivity with vacuum lines. The simple manual operation allows for straightforward handling during vacuum distillation or solvent recovery tasks.

FAQs of Rotary Vacuum Evaporator Cold Trap Condenser Model No. SSI/69:

Q: How does the SSI/69 cold trap condenser enhance solvent recovery in rotary vacuum evaporator applications?

A: The SSI/69 cold trap condenser is designed to capture solvent vapors efficiently by rapidly cooling and condensing them using a coil-in-tube system immersed in dry ice or a suitable refrigerant. This prevents vapors from reaching the vacuum pump, improving solvent recovery and safeguarding laboratory equipment.

Q: What cooling mediums can be used with the SSI/69 condenser, and why are they recommended?

A: This condenser is compatible with dry ice or other appropriate refrigerants. These are recommended because they can achieve the low operating temperatures required (-40C to 20C), optimizing vapor condensation and preventing contamination of the vacuum line.

Q: When should the SSI/69 model be integrated into a laboratory rotary evaporator setup?

A: Use the SSI/69 model whenever you conduct solvent evaporation processes that generate potentially harmful or high-volume vapors. It is especially essential when working with volatile solvents, as it efficiently condenses vapors and protects the vacuum system.

Q: Where is the ideal installation location for the SSI/69 cold trap condenser?

A: The SSI/69 is designed for tabletop or horizontal placement, making it suitable for most standard laboratory benches. Its dimensions (approx. 350 x 180 x 420 mm) allow it to fit conveniently beside rotary evaporators without taking up excessive space.

Q: What are the benefits of the high chemical resistance glass used in this condenser?

A: The borosilicate glass employed in the condenser is tested for high chemical resistance, minimizing the risk of corrosion or reaction with solvents. This extends the life span of the equipment and ensures the purity of condensed solvents for reuse.

Q: How does the leak-proof construction of the SSI/69 enhance laboratory safety?

A: Its leak-proof design prevents hazardous solvent or vapor leaks during operation, reducing risks of exposure and ensuring the safety of laboratory personnel and equipment.

Tell us about your requirement