Rotary Vacuum Evaporator Vertical Condenser Model No. SSI/65

Get a Price/Quote

Rotary Vacuum Evaporator Vertical Condenser Model No. SSI/65 Specification

Frequency
50/60 Hz

Voltage
220-240 V AC

Automation Grade
Semi-Automatic

Core Components
Motor, Glassware, Vacuum Sealing System

Temperature Range
Up to 180C

Feature
Highly Efficient

Accuracy
100 %

Model No
SSI/65

Power Source
Electric

Measurement Range
0-250 ml/min (distillation rate)

Capacity
1 Litre

Equipment Materials
High quality borosilicate glass, corrosion-resistant metal

Type
Rotary Vacuum Evaporator Vertical Condenser

Usage
Laboratory

Dimension (L*W*H)
550 x 400 x 800 mm

Weight
Approx. 18-20 kg

About Rotary Vacuum Evaporator Vertical Condenser Model No. SSI/65

Rotary Vacuum Evaporator Vertical Condenser Model No. SSI/65

This model of evaporator is supplied complete with geared drive non sparking noiseless motor offering smooth, speed control by analog knob upto 200RPM, jack arrangement is fitted on tapered front base for positioning glass assembly. Double walled water bath thermostatically controlled temp.. veritcal glass condenser double coiled with three opening for vacuum and cooling, pear (Kjeldhal) shaped evaporating falsk capacity 800ml, receiver flask capacity one litre fitted with a ball joint, feeding tube and vapour path tube provided with a rubber tube, pressure tube, seal, clips and spring a complete working unit.

Replacement part for (Vertical Condenser) SSI/65

SSI/65/01	Vertical condenser double coiled with two outlets for water circulation. With S-35 ball at bottom for connecting to receiving flask, quick fit type joint at top for vacuum. Cock for feeding tube on one side while the other side will be connected to motor with ring.
SSI/65/02	Cone adapter for condenser to vacuum pump
SSI/65/03	Vapour path tube B-24, B-29
SSI/65/04	Gasket seal for vapour tube (VITON)
SSI/65/05	Gasket seal for special chemicals
SSI/65/06	Feed tube for condenser without PTFE pipe..
SSI/65/07	Receiving flask with S-35 ball joint cup (socket) capacity 1000ml
SSI/65/08	Evaporating flask kjeldhal cap. 800ml B-24
SSI/65/09	Evaporating flask kjeldhal cap. 500ml B-24
SSI/65/10	Evaporating flask kjeldhal cap. 300ml B-24
SSI/65/11	Evaporating flask kjeldhal cap. 100ml B-24
SSI/65/12	Tension spring to hold condenser
SSI/65/13	Wire clip to hold vapour tube and boiling flask
SSI/65/14	Ball joint clip S-35 with screw lock
SSI/65/15	Water bath double walled inner S.S with thermostatic temperature control.
SSI/65/16	Spare heater for water bath (ISI mark)
SSI/65/17	Suitable oil free vacuum pump for rotary evaporator with vacuum gauge & regulator
SSI/65/18	Glass safety trap

Efficient Evaporation Performance

Achieve rapid evaporation rates up to 25 ml/min (for water at 100C) with the SSI/65s robust rotary motor and advanced double-coil vertical condenser. The high-quality borosilicate glass and PTFE sealing ensure durability, efficiency, and compatibility with a wide range of laboratory solvents. Use this evaporator to streamline concentration, drying, and solvent recovery tasks efficiently.

Engineered for Laboratory Reliability

The SSI/65 Rotary Vacuum Evaporator is built with a corrosion-resistant epoxy-coated frame and heavy-wall borosilicate glass, delivering excellent chemical resistance and longevity. A stainless-steel, Teflon-coated bath with 4-litre capacity enables extended, safe operation. The over-temperature and dry-run protections add layers of safety for worry-free laboratory usage.

Flexible and User-Friendly Operation

Featuring manual lift and interchangeable standard ball-ground joint flasks, the SSI/65 provides adaptable, hands-on control for researchers. The rotatable speed ranges from 20 to 180 rpm, accommodating delicate and robust evaporation requirements. Semi-automatic controls and a clear display enhance user experience, while the devices compact design (550 x 400 x 800 mm) fits most laboratory setups.

FAQs of Rotary Vacuum Evaporator Vertical Condenser Model No. SSI/65:

Q: How does the vertical double coil condenser improve evaporation efficiency in the SSI/65 model?

A: The vertical double coil condenser in the SSI/65 provides a large cooling surface area of approximately 1200 cm. This design enhances condensation efficiency, resulting in higher solvent recovery rates and reduced process times, even with volatile solvents.

Q: What types of laboratory solvents are compatible with this rotary evaporator?

A: The SSI/65 is compatible with most laboratory solvents, thanks to the high-quality, chemically-resistant borosilicate glassware and PTFE vacuum sealing system. It is suitable for water, organic solvents, and other commonly used lab chemicals.

Q: When is the use of the safety featuresover-temperature and dry run protectionmost beneficial?

A: These safety features are particularly beneficial when operating the evaporator for extended periods or at high temperatures. Over-temperature protection prevents the bath from overheating, while dry run protection safeguards the heating bath from damage when the water level is low.

Q: Where can the SSI/65 Rotary Vacuum Evaporator be installed?

A: The compact dimensions (550 x 400 x 800 mm) and lightweight design (approx. 18-20 kg) of the SSI/65 allow it to be conveniently placed on standard laboratory benches in research facilities, universities, pharmaceutical labs, and industrial laboratories.

Q: What is the process for changing the evaporating flask on this model?

A: The SSI/65 uses a standard ball-ground joint for its evaporating flask, allowing users to easily interchange the 1-litre flask as needed. Simply release the joint and replace the flask with another compatible vessel, ensuring minimal downtime during operations.

Q: How do users benefit from the Teflon-coated stainless steel heating bath?

A: The Teflon-coated stainless steel bath provides uniform heating up to 180C, resists corrosion and chemical attack, and is easy to clean. This ensures accurate temperature control and prolongs the equipments service life, benefiting daily laboratory workflow.

Tell us about your requirement