Send InquiryPENDULUM ON STAND
PENDULUM ON STAND Specification
- Warranty
- 6 Months
- Automation Grade
- Manual
- Voltage
- Not Required
- Model No
- PEND-STND-101
- Accuracy
- High
- Feature
- Used for pendulum experiments
- Power Source
- Not Required
- Temperature Range
- Room temperature
- Core Components
- Pendulum Stand Support Arm Base
- Equipment Materials
- Wooden rod Metal base Metal clamp
- Type
- Mechanical Pendulum
- Usage
- Demonstration of oscillatory motion and pendulum experiments in labs
- Display Type
- None
- Dimension (L*W*H)
- Height: 80 cm Width: 15 cm Length: 15 cm
- Weight
- Approximately 1.5 kg
About PENDULUM ON STAND
Three 2.5-cm pendulum bobs of wood, iron and steel are suspended from a common hanger mounted on a vertical rod screwed to a heavy metal stand. A meter scale and a sliding index with projecting piece is provided. The sliding index can control the length of the first cord. Zero of meter stick is placed at the bottom, and when center of the pendulum is placed opposite this point, the length of the pendulum is read directly from the position of the slider.FAQs of PENDULUM ON STAND:
Q: What is the voltage requirement for the Pendulum on Stand?
A: The Pendulum on Stand does not require any voltage as it is a mechanical pendulum.Q: What is the temperature range suitable for operating the Pendulum on Stand?
A: The Pendulum on Stand is suitable for operation at room temperature.Q: What are the core components included in the Pendulum on Stand?
A: The core components of the Pendulum on Stand include the Pendulum, Stand, Support Arm, and Base.Q: What is the main usage of the Pendulum on Stand?
A: The Pendulum on Stand is used for demonstrating oscillatory motion and conducting pendulum experiments in labs.Q: What is the warranty period for the Pendulum on Stand?
A: The Pendulum on Stand comes with a warranty of 6 months.Q: What is the accuracy level of the Pendulum on Stand?
A: The Pendulum on Stand provides high accuracy for performing pendulum experiments.Q: Can you specify the model number of the Pendulum on Stand?
A: The model number of the Pendulum on Stand is PEND-STND-101.
Tell us about your requirement
Price:
Quantity
Select Unit
- 50
- 100
- 200
- 250
- 500
- 1000+
Additional detail
Mobile number
Email
More Products in PHYSICS LABORATORY EQUIPMENT Category
e/m by Helical Method (Solenoid Method)
Core Components : Solenoid Electron Tube Measuring Instruments
Usage : Determining chargetomass ratio of electrons
Equipment Materials : Metal Glass Plastic
Feature : Helical Method for e/m Measurement
Automation Grade : SemiAutomatic
Model No : EMHelical001
Ripple Tank Apparatus
Core Components : Tank, Wave Generator, Source (Light), Supports, Ripple Accessories (barrier, obstacles)
Usage : Laboratory
Equipment Materials : Transparent Perspex (Tank), Stainless Steel (Supports), Metal/Plastic (Frame)
Feature : Highly Efficient
Automation Grade : Manual
Model No : RT2024
SPECTRUM ANALYSIS TUBES
Core Components : Glass tubes
Usage : Scientific and educational purposes
Equipment Materials : Borosilicate glass
Feature : Versatile spectrum analysis
Automation Grade : Manual
Model No : SAT01
KNIFE SWITCH ON BASE
Core Components : Metal Contacts and Insulated Base
Usage : Electrical Circuit Control
Equipment Materials : Metal and Insulating Material
Feature : Durable Reliable operation
Automation Grade : Manual
Model No : KSXX
SINGHLA SCIENTIFIC INDUSTRIES
GST : 06ACOPS0805K1ZD
GST : 06ACOPS0805K1ZD
No-5309/27, Punjabi Mohalla, Ambala Cantt - 133001, Haryana, India
Phone :07971191038
Send Inquiry
|
 |
SINGHLA SCIENTIFIC INDUSTRIES
All Rights Reserved.(Terms of Use) Developed and Managed by Infocom Network Private Limited. |
